Celto Pro · ACS Series
ACS10 (M+P)
SKU: ACS10
Self-powered master and passive slave 10-inch coaxial line source speaker system featuring IsoTop™ waveguide and integrated DSP.
- Max SPL
- 136 dB Peak above 1 kHz
- Frequency Response
- 95 Hz – 22 kHz
- Driver Configuration
- 10" + 1.7" koaksiyel
- Dispersion
- 100° (H), Vertical is array dependent
- Weight
- ACS10M: 16 kg / ACS10P: 13 kg
2-year distributor warranty · Original product · Engineering support
Overview
The Celto Pro ACS10 (M+P) is a plug-and-play line source system designed to deliver high-performance sound reinforcement with maximum setup efficiency. The system consists of an active master cabinet (ACS10M) housing the amplification and DSP, paired with a passive companion cabinet (ACS10P).
Featuring a 10-inch neodymium LF transducer and a coaxial high-frequency driver loaded with the proprietary IsoTop™ waveguide, it ensures phase-coherent, highly consistent horizontal dispersion of 100°. Powered by the 4th generation CELTO TrueSound Class D SPM3000M amplifier module with active PFC, the system delivers a combined 1500W RMS (LF) and 800W RMS (HF), achieving a peak SPL of 136 dB. The onboard DSP, driven by 32-bit AKM converters, provides precise crossover, EQ, phase alignment, and limiting, alongside pre-configured presets for Near, Mid, and Far-field applications. Built from premium birch plywood and finished with a touring-grade rubberized PolyUrea coating, the ACS10 is engineered for both demanding fixed installations and mobile touring. Its fully integrated, cable-free rigging system allows for rapid deployment with 0°, 5°, and 10° splay angles.
136 dB
MAXIMUM PEAK SPL
95 Hz – 22 kHz · Frequency Response
Technical Specifications
ACS10 (M+P) · SKU ACS10
| ACOUSTIC PERFORMANCE | |
|---|---|
| Speaker type | Self-powered Coaxial Line source Speaker System |
| Maximum SPL (calculated) | 136 dB Peak above 1 kHz |
| Frequency response (-6 dB no preset) | 95~22000 Hz |
| Nominal directivity (-6 dB) | 100° (H), Vertical is array dependent |
| DRIVERS | |
| LF | 10" coaxial CELTO 10CXN400LA |
| Woofer Chassis | Die Cast Aluminium |
| Woofer Voice coil | 3" / 75 mm |
| HF | CELTO ACDN44 loaded by IsoTop waveguide (in coaxial mounting) |
| HF RMS power (AES standard) | 80 W above 1.2 kHz |
| HF Exit | 1" / 25 mm |
| HF Voice coil diameter | 1.7" / 44 mm Silver loaded wire |
| HF Diaphragm | HSP Annular (High Strength Polymer) |
| SIGNAL PROCESSING | |
| DSP Architecture | 115 dB 32-bit AKM AD/DA converters, 56-bit accumulators |
| DSP Control | Crossover, EQ, phase and Limiter |
| DSP Presets | Near / Mid / Far Field - Flat / Music |
| CABINET & MOUNTING | |
| Cabinet finish | Touring Grade Rubberized PolyUrea Black coating |
| Floor monitor use | N/A |
| Flying hardware | Fully integrated, cable-free, rigging with0° / 5° / 10° angles |
| Mounting hardware | M10 Thread for Mounting Adapter |
| CONNECTIVITY | |
| Connectivity | ACS10M: Balanced XLR In/Thru, Speakon Out (powers one ACS10P), Powercon In/Out |
| PHYSICAL | |
| Speaker size (HxWxD) | 450 × 280 × 395 mm (17.7 × 11.0 × 15.6 in) |
| Speaker Weight | ACS10M: 16 kg / ACS10P: 13 kg |
| Shipping information | 37.5kg695x500x580mm(One ACS10M + one ACS10P in a single carton) |
| Accessories | ACS10-CB (Crossbow flying/stacking frame)ACS10-ZBAG (padded bag with Zip)CB700 (connection bar)ACS10-MA (mounting adapter) |
| OTHER | |
| Design | 2-way coaxial with IsoTop™ waveguide |
| Transducers | 10” LF with 3” PI grade VC + 1” exit / 1.7” VC Annular HF (All Neodymium) |
| Amplifier Module | CELTO SPM3000M with aluminium heatsink |
| Power Supply | CELTO Pulsar with Acve PFC + SMPS (universal mains 90~260V AC) |
| Amplifier Type | 4th generation CELTO TrueSound proprietary class D |
| Power Output | LF : 3000 W Peak / 1500 W RMS (total for Master + Passive cabinets)HF : 1600 W Peak / 800 W RMS (total for Master + Passive cabinets) |
| Preamplifier | -120 dB noise floor op-amps, MUSE™ Fine Gold capacitors |
| Enclosure | Exterior grade Birch Plywood with tongue and groove assembly |
ACS10 (M+P) · 2-year distributor warranty · Original product · Engineering support
Request a Quote for This ProductDownloads
ACS Series — Other Models
Frequently Asked Questions
What is the price of ACS10 (M+P)?
Pricing depends on your project configuration. Contact our engineering team to determine the most suitable setup and receive a current quote.
What does the distributor warranty cover?
Every system we install is our direct responsibility for two years against manufacturing defects, with scheduled measurement, calibration and maintenance support.
How is product originality guaranteed?
We import all required parts and products directly from the manufacturer's factory, preserving the authenticity of the system.
How does the design & quote process work?
Let us build the acoustic infrastructure of your project to engineering standards with needs analysis, detailed venue exploration, and accurate technical guidance.
2-year distributor warranty · Original product · Engineering support